Biamp VA-4030e - Manual (Page 14)

13
Message Memory: 5.625 MB
Network Audio: 20-bits, 48kHz, 5-1/3 ms (fixed)
Network Connections: RJ45 with shielded Ethernet cable
(CAT5, CAT5e, CAT6 or CAT 7)
Analog Inputs: (VA-2060e and VA-4030e) Per Channel
Nominal Input Range: -66dBu to 0dBu
Maximum Input Level: +24dBu
Equivalent Input Noise:
(max Gain) >-125dbu
Dynamic Range: >94dB
Input Impedance: 8k
Ω
Phantom Power: +48V DC
Frequency Response: 40Hz-20kHz +/- 2dB
Signal to Noise Ratio: >88dB, unweighted
THD + Noise: <0.5% 50Hz-100Hz
<0.3% 100Hz-10kHz
Rated Output Power:
VA-2060: 2x 60W RMS, total 120W
VA-2060e: 2x 60W RMS, total 120W
VA-4030: 4x 30W RMS, total 120W
VA-4030e: 4x 30W RMS, total 120W
Supported Loads:
Low Impedance: 4 Ω, 8Ω
Constant Voltage: 25V, 70V or 100V
Output Configuration: Transformer Coupled (ground free)
Output DC Offset: <100mV
PAR Relays
Form: Single Form C contact
Max Operating Voltage: 125V AC, 60V DC
Max Operating Current: 100mA AC, 1A DC
Power:
AC (all amplifiers): 100V-240V AC, 50H 60 Hz
DC (VA-2060e and VA-4030e): Nominal 24V DC
Continuous power rating 60 Watts
Peak Power rating 150 Watts
DC Range: 18V-30V; <100mV Ripple
Overall Dimensions:
Height: 3.25 in (82.5mm)
Width: 19 in (483mm)
Depth: 14.2 in (360mm)
Weight:
VA-2060: 24.7lbs (11.2kg)
VA-2060e: 24.9lbs (11.3kg)
VA- 4030: 26.0lbs (11.8kg)
VA- 4030e: 26.2lbs (11.9kg)
Compliance: FCC Part 15B
EN 54-16 certified
UL 60065 and C-UL listed
CCC pending
C-Tick
RoHS Directive
2002/95/EC
EN 60849, AS 60849 verified
Environment
Ambient Operating Temperature Range: 18-108 degrees F (-8 – 42° C)
Ambient Intake:
Humidity:
0 – 100% non-condensing
Altitude: 0 – 10,000 Feet MSL
VOCIA AMPLIFIERS VA-2060, VA-2060e, VA-4030, VA-4030e SPECIFICATIONS
Vocia Amplifier 2060 / 2060e / 4030 / 4030e SPECIFICATIONS