Biamp VPSI-1 - Manual (Page 8)

8
VOCIA PAGING STATION INTERFACE 1 (VPSI-1)
Using the VPSI-1 with a Vocia Input 6 (VI-6)
The VPSI-1 can be connected to the VI-6 Paging Port Inputs. One VPSI-1 is able to be connected to each Paging Port Input with a total
of four able to be connected to a single VI-6. When the VI-6 audio input path is configured to use the VPSI-1 the associated Line Inputs
of the VI-6 will be disabled. The audio channel Signal present LEDs on the front of the VI-6 chassis will continue to operate when the input
channel is configured for Paging. The LED indication will function as it normally would when configured as a Background or a User Input.
The LEDs will function regardless of whether the associated VPSI-1’s PTT is pressed.
Live Page Preambles are supported but must be assigned to the host VI-6 in the software. Each Paging Input can be configured in the
software with their own dedicated Page Code. Store-and-Forward paging and PIN Code protection for microphones connected to a VI-6
is not available.
LED Indicators when used with VI-6
The VPSI-1 has three status LED outputs for paging feedback. When connected to a VI-6 LED behavior is as follows:
VPSI-1 LED Status Busy LED Wait LED Talk LED
Idle Off Off 5 second pulse
Destination Zones in Use Flash Flash Off
Wait Off On Off
Talk Now Off Off On