Biamp MPA250 - Manual (Page 9)

8
SPECIFICATIONS
Continuous Power (4 ohm direct & transformer outputs):
Signal-to-Noise Ratio (20Hz~20kHz):
referenced to 250 watts into 4 ohm direct output
Total Harmonic Distortion:
20Hz~20kHz @ 250 watts into 4 ohm direct output
100Hz~15kHz @ 250 watts at transformer outputs
Intermodulation Distortion (SMPTE):
Frequency Response (20Hz~20kHz):
Input Impedance:
balanced
unbalanced
Input Sensitivity (selectable):
Power Requirements:
Power Consumption:
Dimensions (H x W x D):
Weight:
250 watts
> 90dB
< 0.2%
< 1.0%
< 0.35%
+0/-1dB
20k ohms
10k ohms
775mV / 300mV
120VAC @ 60Hz
900 watts
3.5" x 19" x 8.5" (89 x 483 x 216mm)
23 lbs. (10.5kg)