Aussie Vantage LP Gass Grill 6804T80SS1 - Manual (Page 14)

14
To reduce the risk of a laceration hazard:
• Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp.
CAUTION
!
Step 17
Warming Rack / Flavor Activator / Cooking Grid Assembly
A. Insert Warming Rack leg ends into holes on top edge of firebox.
Seat securely.
B. Lay a large Flavor Activator over each Burner on the lower body ridges. Lay a small Flavor Activator between each
large Flavor Activator. Each Flavor Activator has individual guides on the body ridges to keep in place.
C. Place the Cooking Grids over the Flavor Activators on the upper Body ridges.
cooking grid
C
Step 18
Battery in Igniter Installation
Unscrew Igniter Cover and insert AA Battery with the negative “-“ end going in first. Replace the cover and tighten
securely.
Battery
AA 1.5v Alkaline
1 pc
This Completes the Grill Assembly.
+
-
A
B