Audiovox Prestige P-950W User Manual

Page 4

128-6266

4 of 16

BASS CONTROL

To adjust the bass level (Equalizer function inactive), first select
the Bass mode by pressing the SEL button

so the BAS indication

appears on the display panel. Within 5 seconds of choosing the
Bass mode, press the AUDIO CONTROL

button to decrease

the bass response, or the AUDIO CONTROL button to increase
it as desired. The level will be shown on the display panel from a
minimum BAS -12 to a maximum of BAS +12 (BAS 00 indicates
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.

TREBLE CONTROL

To adjust the treble level (Equalizer function inactive), first select
the Treble mode by pressing the SEL button

so the TRE

indication appears on the display panel. Within 5 seconds of
choosing the Treble mode, press the AUDIO CONTROL button

to decrease the treble response or the AUDIO CONTROL

button to increase it as desired. The level will be shown on the
display panel from a minimum TRE -12 to a maximum of TRE +12
(TRE 00 indicates flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.

LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance
mode by pressing the SEL button

so the BAL indication appears

on the display panel. Within 5 seconds of choosing the Balance
mode, press the AUDIO CONTROL button

to adjust the

stereo balance to the left channel speakers or the AUDIO
CONTROL button to adjust it to the right channel speakers. The
balance position will be shown on the display panel from BAL L16
(full left) to BAL R16 (full right). When the volume level between

-4-

the left and right speakers is equal, BAL 00 will be shown on the
display panel. The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.

FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader mode
by pressing the SEL button

so the FAD indication appears on

the display panel. Within 5 seconds of choosing the Fader mode,
press the AUDIO CONTROL button

to adjust the front-rear

speaker balance to the rear speakers or the AUDIO CONTROL
button to adjust it to the front speakers. The fader position will be
shown on the display panel from FAD R16 (full rear) to FAD F16
(full front). When the level between the front and rear speakers is
equal, FAD 00 will be shown on the display panel. The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.

LOUDNESS CONTOUR (LOUD)

When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics
of human hearing. Press and hold the BAND/LOUD button for 2
seconds to activate this feature; LOUD ON will appear on the display
for 5 seconds. Pressing the button again for 2 seconds will deactivate
the feature; LOUD OFF will appear on the display panel for 5
seconds.

AUDIO MUTE SELECTOR (MUTE)

Press this button momentarily to mute the volume from the system
(MUTE will appear blinking on the display panel). Pressing the
button again or activating any other button/function will return to
the volume level setting in use before the Mute function was
activated. During disc play, pressing this button will mute disc