SoundMax SM-DVD5111 - Manual (Page 14)

14
Video setup
Component
S-Video: set to this item when connecting to S-Video terminals.
YUV: set video output in analog component video format when
connecting to Y/U/V terminals.
RGB: set video output in Red/Green/Blue format when connecting to
SCART terminals.
VGA: set to this item when connecting to VGA terminals.
The player is always with signal output under all conditions, and if it is
connected to the composite video display equipment, suggesting the
linkage be set on "OFF".
TV Mode
You can choose between progressive (P-SCAN) and interlaced output when playing with "YUV" or "RGB"
mode.
Sharpness, Brightness, Contrast
You can set the sharpness, brightness and contrast according to your preference.
Preference (available when no disc is inside)
TV Type
This unit is suitable for all kinds of TV systems. You can select one of
the PAL, NTSC or AUTO.
PAL: this system is used in CHINA, EUROPE, HONGKONG etc.
AUTO: the TV system is auto switched according to the disc system.
NTSC: this system is used in USA, TAIWAN, JAPAN etc.
Audio, Subtitle, Disc Menu
These are the initial settings by your preference. If a setting is
supported by disc content, it will work. Otherwise the disc default
value works. And these settings can be changed respectively by
pressing AUDIO and SUBTITLE button when playing.
Parental
The control level is for parental to control playing content and protect your children from violence and
erotic. The disc, the level of which is higher than the setting level cannot be played.
Password