Acer X263W - Manual (Page 14)

X263W
EN- 13
STANDARD TIMING TABLE
To reduce the need for adjustment for different modes, the monitor has default setting modes that are most
commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen” pattern or using the pattern in the floppy disk provided. The only
condition to store as a user mode is the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes.
Display Mode Hor. Frequency
(kHz)
Vert. Frequency
(Hz)
Pixel Frequency
(MHz)
SYNC Polarity
(H/V)
31.469 59.940 25.175 -/-
37.861 72.809 31.500 -/- VGA 640x480
37.500 75.000 31.500 -/-
35.156 56.250 36.000 +/+
37.879 60.317 40.000 +/+
48.077 72.188 50.000 +/+
SVGA 800x600
46.875 75.000 49.500 +/+
48.363 60.004 65.000 -/-
56.476 70.069 75.000 -/-
XGA 1024x768
60.023 75.029 78.750 +/+
SXGA 1152x864 67.500 75.000 108.000 +/+
63.981 60.020 108.000 +/+ SXGA 1280x1024
79.976 75.025 135.000 +/+
WXGA+ 1440x900 55.935 55.887 106.500 -/+
WXGA+ 1680x1050 65.290 59.954 146.250 -/+
VESA
WUXGA 1920x1200 RB 74.038 59.950 154.000 +/-
VGA TEXT 720x400 31.469 70.087 28.322 -/+
640x480 35.000 66.667 30.240 -/-
832x624 49.725 74.500 57.283 -/-
Macintosh
1024x768 60.150 74.720 80.000 -/-
NTSC 15.730 29.970 13.500 -/-
NTSC 480P 31.470 59.940 27.000 -/-
1080i 33.720 29.970 74.176 +/+
720P 44.960 59.940 74.176 +/+
Video
1080P 67.500 60.000 148.500 +/+