Atlantis Land A02-F8-2C/M2 - Manual (Page 12)

8
Rack Installation (optional)
The 10-port 10/100/1000Mbps Gigabit Ethernet Switch can be
mounted in an EIA standard size, 19-inch rack, which can be placed
in a wiring closet with other equipment. To install, attach the
mounting brackets on the switch’s front panel (one on each side) and
secure them with the screws provided.
Figure 2- 2A. Attaching the mounting brackets to the Switch
Then, use the screws provided with the equipment rack to mount the
Switch in the rack.
Figure 2-2B. Installing the Switch in an equipment rack