ATI Amplifier Technologies AT1202 - Manual (Page 4)

Page 4
F AC Fuse
Your amplifier is supplied with a rear panel mounted main
AC fuse. This main fuse may need replacement if the unit
will not turn on. Never replace the the main fuse with
other than the one indicated.
WARNING: Always turn off the amplifier and unplug the power cord
before making any electrical connections.
G AC Input
Use the included power cord to connect your amplifier to
an AC power source.
H Speaker Outputs
Use the OUTPUT binding posts to connect the amplifier to
your speakers; red for positive, black for negative.
NOTE: The picture below is an AT1202. The AT602 is virtually
identical in appearance.
B A
E F H G D C
Getting to Know the Rear Panel
A Audio Inputs
Use the INPUT jacks to connect to the outputs of a
preamplifier, receiver with preout connections, CD player,
or other control devices.
B Input Gain Controls
Use these to adjust the input gain of each channel.
C Product Serial Number
Write this number in the space provided on page 10 for
future reference.
D Remote Trigger Input
Use the REMOTE TRIGGER jack to connect to a compatible
preamplifier, source device, or other product with a
3.3-24VDC output.
E Master Power Switch
Turns the current to the amplifier on or off.