Asus LSISAS RAID Card PIKE 1068E - Manual (Page 34)

3-4 Chapter 3: Driver installation
3.1.2 Windows ® Server 2003 OS
During Windows ® Server 2003 OS installation
To install the RAID card driver when installing Windows ® Server 2003 OS:
1. Boot the computer using the Windows ® Server 2003 OS installation CD. The
Window ® Setup starts.
2. Press when the message “Press F6 if you need to install a third party
SCSI or RAID driver...” appears at the bottom of the screen.
3. The next screen appears. Press to specify an additional device.
Windows Setup
S=Specify Additional Device ENTER=Continue F3=Exit
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver...