Light kit – Hunter 59010 52 Domino User Manual

Page 14

www.HunterFan.com

1.888.830.1326

Light Kit

Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.

To attach the lower switch housing, connect

the upper plug connector from the motor

to the lower plug connector in the lower

switch housing assembly.

Note: Both plug connectors are polarized and

will only fit together one way. Make sure the

connectors are properly aligned before connecting

them. Incorrect connection could cause improper

operation and damage to the product.

Install A15 E12 bulbs (40 Watt maximum)

into the sockets.

Note: Do not use CFL bulbs to replace

your light bulbs. Your lights may flicker or

fail to work.

A15 E12 Bulb

Place the lower switch housing assembly into

the upper switch housing. Align the screw

holes in the upper and lower switch housings.

Attach the lower switch housing to the upper

switch housing with three housing assembly

screws, found in the hardware bag.

Upper Switch Housing

Lower Switch Housing