Light kit – Hunter 59013 52 Contempo User Manual

Page 14

Text mode
Original mode

www.HunterFan.com

1.888.830.1326

Install three housing screws, found

in the hardware bag. Tighten all

three screws securely.

Light Kit

Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.

Connect the plugs from the upper and

lower switch housings. Make sure to line up

the colored markings on the connectors.

Place the light kit over the upper switch

housing and align the screw holes.

Screw

Holes