Hunter 51003 34 Carmen - Manual (Page 3)

Tools Needed
Power Drill
(optional)
Ladder
9/64” Drill Bit
(optional) Screwdrivers
Pliers Wire Strippers
Mounting Options
1. You will need a Longer Downrod
sold separately
2. You may need an Angle Mounting Kit
sold separately
Use the 3 steps below to determine if
your ceiling angle is greater than 34°
34 O
OPTION
1
Flat
OPTION
2
Angled
2 3
*most common
Guide Touches
BOTH Ceiling & Wall
SI
TU
AT
IO
N 1
CEILING
1
WA
LL
Guide Touches Wall
but NOT Ceiling
SI
TU
AT
IO
N 2
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
You need ONLY
a Longer
Downrod
Use this guide to determine
which mounting option is
appropriate for your ceiling type.
skip to next page
SLIDE
toward ceiling
PLACE
against wall
FOLD
on dotted line
If mounting to a support structure,
you will also need:
3
M0001-01 • 08/03/12 • © Hunter Fan Company