Hunter 53167 52 Allendale - Manual (Page 14)

www.HunterFan.com
1.888.830.1326
Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on
the connectors.
Light Kit
Install the third switch housing screw.
Tighten all three screws securely.
Switch
Housing
Screw
Notch
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click
“How do I install my fan without the light kit?”
Partially install two of the switch housing
screws found in the hardware bag. Align
the notches in the sides of the lower switch
housing with the screws on the upper switch
housing. Twist the lower switch housing
clockwise to lock into place.
14
M0076-01 • 05/24/13 • © Hunter Fan Company