You’re done, Switch housing (continued) – Hunter 54018 60 Royal Oak User Manual
Page 14
www.HunterFan.com
1.888.830.1326
Switch Housing (continued)
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the switch housing falling.
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Lift the lower switch housing until its
screw holes are aligned with the screw
holes in the upper switch housing.
Install the three switch housing screws,
found in the hardware bag. Tighten
all three screws.
CONGRATUALTIONS!
YOU’RE DONE!
14
M0074-01 • 05/06/13 • © Hunter Fan Company
This manual is related to the following products: