Actiontec GT701D User Manual User Manual
Page 73
70
Actiontec DSL Modem User Manual
7. The “Internet Protocol (
TCP/IP
) Properties” window appears.
8. In the General tab, make sure the radio button next to “Use the following
IP
Address” is active (contains a black dot). If the radio button is already active,
leave it alone.
9. Enter the following address in the “
IP
Address” text box:
192.168.0.2
Enter the periods in the address by pressing the space bar on the keyboard.
10. Enter the following address in the “Subnet mask” text box:
255.255.255.0
Enter the periods in the address by pressing the space bar on the keyboard.
11. Enter the following address in the “
Default gateway
” text box:
192.168.0.1
Enter the periods in the address by pressing the space bar on the keyboard.
12. Click OK. The Internet Protocol (
TCP/IP
) Properties window disappears.
13 In the Local Area Connection Properties window, click Close
.
The Local Area
Connection Properties window disappears.
14. Click Close in the Local Area Connection Status window. The window disappears.