AmeriHome QTPOP Table Top Popcorn Maker - Manual (Page 6)

QTPOP Electric Tabletop Popcorn Popper
6
CLEANING & STORAGE
Do not immerse the Popcorn Popper or the kettle in water. Doing so could result in electric shock.
Allow the unit to cool for at least 30 minutes before attempting to disassemble and clean.
Clean the kettle frequently to reduce the risk of oil burning and damaging the kettle.
Quick Kettle Cleaning
Turn the “pop” switch off, and pour 4-6 ounces of clean water into the kettle as if you were adding oil. DO
NOT use detergent. Turn the “pop” switch on and run with the water in the kettle for 1-2 minutes. Turn off
the “pop” switch and allow the kettle and water to cool for 30 minutes. Drain water from the kettle and dry.
Deep Cleaning the Kettle & the Popcorn Popper
Occasionally the kettle and Popcorn Popper will require more in depth cleaning. A through cleaning is
recommended before storing the Popcorn Popper for an extended time.
Remove the external plug from the wall outlet, and remove the kettle cord from the outlet on the inside of
the Popcorn Popper before storing or cleaning.
Remove the kettle from the Popcorn Popper and wash with warm soapy water. Wipe down the inside of the
Popcorn Popper with a cloth wet with hot and soapy water. DO NO SUMBERGE THE KETTLE PLUG OR
THE POPCORN POPPER IN WATER. Wipe the Popcorn Popper dry, or allow to air dry, before storing.
The kettle may be scrubbed with a scouring pad if necessary. DO NOT PLACE THE POPCORN POPPER
OR THE KETTLE IN THE DISHWASHER.
The light bulb can be replaced with an AC 120V 10W bulb.