AmeriHome MSMIX Milk Shake Mixer - Manual (Page 3)

Smoothie & Milk Shake Mixer MSMIXER Assembly and Operating Instructions
Features
120 Volts / 60 Hz
12 oz. Aluminum Mixing Cup
2-Speed Motor
700-1050 RPM
Operating Instructions
(Refer to diagram on page 2 of this manual)
1. Before operating, check that the power supply has adequate power to operate the Milk Shake Mixer. Check
that the Main Power Switch (1) is in the OFF position. Plug the Power Cable (8) into a power supply.
2. Fill the Aluminum Cup (6) with your beverage, soft ice cream, or soft yogurt. Slip the Aluminum Cup into the lip
of the Switch Control (3) and rest it on the Cup Rest (9). Turn the Main Power Switch (1) to the HI or LOW
position. Allow the mixture to stir completely before turning Main Power Switch off. Remove aluminum cup.
Unplug the Power Cable when Mixer is not in use.
Precautions
CAUTION: DO NOT RUN THE MOTOR EXCESSIVELY FOR MORE THAN 3 (THREE) MINUTES AT A TIME.
THE MOTOR MAY OVERHEAT.
CAUTION: DO NOT INSERT YOUR FINGERS, HAND, SPATULA OR SPOON INTO THE ALUMINUM CUP
WHILE THE MIXER IS TURNED ON. KEEP HANDS AND FINGERS CLEAR FROM MIXING WAND AND
MIXING BLADE WHILE POWER IS TURNED ON.
CAUTION: WHEN TILTING THE MOTOR HOUSING FOR CLEANING, DO NOT ALLOW FINGERS TO
BECOME “PINCHED” WITH THE HINGE ON BACK BRACE.
Remember to turn the Main Power Switch to the OFF position and disconnect the Power Cable from
the power supply before cleaning, servicing, replacing the Mixing Blade. KEEP POWER CORD AWAY
FROM LIQUIDS.
Wash hands after handling the power cord. Touching the power cord could expose you to lead, which is
known in the State of California to cause cancer, birth defects and other reproductive harm.
MSMIXER Smoothie & Milk Shake Mixer 3