Set up wi-fi connection – Brickcom WFB-100Ap User Manual
Page 7
Confidential
© Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM
| EXPERT IN IP SURVEIL LANCE
Set Up Wi-Fi Connection
•
If the WFB-100Ap and DWRT-600N are running with the factory default settings,
the WFB-100Ap can be connected to the DWRT-600N automatically in around 90
seconds after power-on.
–
The network name (SSID) of the DWRT-600N is
Brickcom
.
–
The wireless connection is not encrypted and is not secure.
–
To reset the DWRT-600N to the factory default, press the Reset button for 10 seconds
and all the LED indicators will go off, then release it. This process takes around 60
seconds.
–
To reset the WFB-100Ap to the factory default, press the Reset button for 10 seconds
and then release it. This process takes around 90 seconds.