BlueBird S22H5DA - Manual (Page 14)

14
Cutting unit
Depth lever
Use the depth lever to raise and lower the blades
between working and transport position. The depth
lever has a lock-out bolt that should be left in till the
blades wear down. Then move the bolt to another
hole to allow the blades to penetrate the soil to a
depth of 1/8" to 1/4" with a maximum penetration
of a 1/2”. Check your seed bag for the
manufacture’s recommended depth of application.
Clutch
The clutch tightens the drive belt and engages the
drive for the blades. When the clutch lever is
pressed against the handle, the blades begin to
rotate. Hold the clutch tightly when working so that
the belt does not slip.
CONTROLS
DEPTH LEVER
CLUTCH LEVER
Engine
Refer to your engine manual.