Hyundai H-DVD5008-N - Manual (Page 11)

H-DVD5008-N ( www.hyundai-electronics.ru ) ENGLISH 11
Connection
Before connection
Disconnect the AC power supply cord.
Video system connection
The following available video output for this unit.
Composite Video
Use the AV cable (yellow terminal) to connect composite video output of this unit to the TV/monitor
video input.
S-Video
Use the S-video cable to connect the s-video output of this unit to the TV/monitor S-video input.
Component Video (YUV)
Use 3-core AV cable to connect the component output terminals of this unit to the corresponding
TV/monitor input.
VGA (Option)
Use a VGA cable to connect the VGA output to the TV/monitor VGA input terminal.
SCART (Option)
Use a 21_pin SCART cable to connect the SCART output to the TV/monitor SCART input
terminal.
Notes:
· Which connection depends on the TV/monitor input terminal.
· Don't use the all connections at one time; otherwise the picture will be affected.
· Only the physical connection conforms to the video setting can produce the normal picture
(reference to the Video Setup in System Setup).