Avision AV36 (FL-0914S) - Manual (Page 87)

The default setting is indicated in highlighted color. If you
wish to change the setting, use this window to reset the
setting for the file format, destination application, or other
scan settings. See “Configuring the Button” in the
subsequent section to reset the settings.
4. Click the OK button to leave the window.
6.3 Scanning From One Touch of the Button
1. Insert document to the scanner.
2. Choose the button on the Button Panel to send the scanned
image to your specified destination. The selected button will
be highlighted. (For example, if you want to scan with
button #4, which open Microsoft Paint and display the
scanned image in the main window of Microsoft Paint,
button #4 on the screen will be highlighted.)
3. Press the Scan button on scanner.
4. After the scanning is finished, the Microsoft Paint software
will be launched and the scanned image appears in the
main window of Microsoft Paint as below.
6-3