Avision FB6000 - Manual (Page 9)

2-2
2.2 UNLOCKING YOUR SCANNER
To protect the scanning unit from damage during transportation, a lock
switch is designed at the back of the scanner to keep the scanning
unit from moving. To unlock the scanner, move the lock switch up as
shown in Fig. 2-1.
Figure 2-1 Unlocking the Scanner
Figure 2-2 Home position
Note: If the scanning unit is not located at the front of the scanner
before transporting the scanner, be sure to do the follows:
1. Turn on the scanner.
2. The scanning unit should move to the front of the scanner.
3. Press the lock switch down to the “Lock position”.
4. The scanner is now ready to transport.
Unlocked
Locked
Scanning unit at
this position
before locking
the scanner