Avision FB6280E (BT-0911S) User Manual

Page 58

By Length+Position: When a multi-feed is detected for the

first time, the scanner memorizes the length and position of the

paper attached to the document. When you perform next

scanning, this pattern of multi-feed will be bypassed.
To use the intelligent mode,
1. Choose your desired multi-feed detecting method to

bypass by.

2. When multi-feed occurs during scanning, a multi-feed

message appears.

3. Press the Scan button on the scanner. The LED indicator

first turns to red color and then stays in green color.

4. Click OK to close the multi-feed message.

5. Open your TWAIN data source in your scanning application.

The same multi-feed condition will not be recognized as

multi-feed.

Note:

1. You can clear the previous multi-feed conditions by

clicking the Reset button.

2. The scanner can memorize to bypass up to 25 multi-feed

conditions.

3. If you uninstall your scanner driver, the previous multi-

feed conditions which have been set to memorize and skip

will still be valid.

4-38