Avision AV50F (FF-0803S) - Manual (Page 96)

6.3 Scanning From One Touch of the Buttons
1. Adjust the paper guide for the width of paper and load the
document with their tops into the input tray.
2. Turn the knob on the scanner to select one of the number
marks (1, 2, 3, 4, 5, 6). (For example, if you want to scan
with button #4, which opens Microsoft Paint and displays
the scanned image in the main window of Microsoft Paint,
turn the knob to select the number mark, 4.)
3. Press the Scan button on scanner.
4. After the scanning is finished, the Microsoft Paint software
will be launched and the scanned image appears in the
main window of Microsoft Paint as below.
Note:
For details information on how to use the Button Manager,
please refer to the user’s manual in the supplied CD.
The knob on the scanner allows you to choose button # 1~6;
however, button # 7~9 can be set only via the Button Manager
software.
6-4