Avision AV8000S - Manual (Page 49)

7-4
Question: When I power on the scanner, the
lamp does not light.
Answer: The possibilities are as follows:
a) The lamp is out of order. In
that case, contact your authorized
local dealer to change the lamp. The
life time of the lamp is about 5000
hours.
b) Check whether the READY/Error
LED on the front panel steadily
lights or not.
If it flashes orange light, the power
adapter malfunctions or the main board
is short-circuited.
Contact your authorized local dealer to
replace the power adapter or main
board.
Question: Getting image from the scanner is not a
problem, but when scanning, the
scanner or system will often crash.
Answer: Please check
a) If the cable is firmly seated;
b) Only two SCSI terminators can be
connected to your SCSI daisy chain. One
is at the end of the SCSI device, and
another is already in your host adapter.