Avision AV176+ (FL-1006S) - Manual (Page 98)

User’s Manual
8.3 Replacing the Snap-in Pad Module
After scanning approximately 30,000 pages through the ADF,
the pad may be worn out and you may experience problems
with document feeding. In this case, it is highly recommended
to replace the pad module with a new one. For ordering the
pad module, please consult your nearest dealer and follow the
procedure below to replace it.
Disassembling Procedure
1. Gently open the ADF Front cover to the left.
2. Press both arms of the ADF snap-in pad module inwardly
with your fingers to pull out the ADF snap-in pad module.
Assembling Procedure
1. Press both arms of the ADF snap-in pad module inwardly
with your two fingers.
2. Place it into the holes until it snaps into place.
8-3