beautypg.com

Using the glass ceramic hob, Switching the cooking zones on and off, Cooking zones – Indesit KN6C61A User Manual

Page 19

background image

GB

19

Using the glass ceramic hob

! The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.

Switching the cooking zones on and off

To switch on a cooking zone, turn the corresponding
knob in a clockwise direction.
To switch it off again, turn the knob in an
anticlockwise direction until it is in the “0” position.
If the COOKING ZONE ON indicator light is lit, this
shows that at least one pf the cooking zones on the
hob is switched on.

Cooking zones

The hob is equipped with electric hilite heating
elements. When they are in use the following items
on the hob become red.

A. The cooking zone with
radiant heating elements.
B. The residual heat indicator
light: this indicates that the
temperature of the
corresponding cooking zone

is greater than 60°C, even when the heating element
has been switched off but is still hot.

Description of the heating elements
The circular radiant heating elements become red 10 -
20 seconds after they have been switched on.
The circular hilite heating elements guarantee even
heat distribution in addition to the usual advantages
that hilite heating elements bring.
Hilite elements emit high levels of heat and light as
soon as they are switched on, offering the following
practical advantages:
· rapid heating (in relation to a gas burner)
· rapid cooling
· even temperature across the whole surface (due to

the circular heating elements)

Practical advice on using the hob
• Use pans with a thick, flat base to ensure that

they adhere perfectly to the cooking zone.

• Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use
all the heat produced.

• Always make sure that the base of the pan is

completely clean and dry: this ensures that the
pans adhere perfectly to the cooking zones and
that both the pans and the hob remain effective for
a longer period of time.

• Avoid using the same cookware that is used on gas

burners: the heat concentration on gas burners may
have warped the base of the pan, causing it not to
adhere to the surface correctly.

• Never leave a cooking zone switched on without a

pan on top of it, as doing so may cause the zone to
become damaged.

Setting Normal or Fast Plate

0

Off

1

Cooking vegetables, fish

2

Cooking potatoes (using steam) soups,

chickpeas, beans.

3

Continuing the cooking of large quantities of

food, minestrone

4

For roasting (average)

5

For roasting (above average)

6

For browning and reaching a boil in a short

time.

A

A

A

A

B

This manual is related to the following products: