Braun 2270-5316 Silk-épil EverSoft - Manual (Page 13)

13
8. In order to clean the shaver head,
remove the shaving foil frame.
To do so, press the release bars
on the front and back and pull it
off.
9. Carefully tap the shaving foil
frame on a flat surface.
10. Brush out the cutter block as well
as the area below the cutter
block.
11. Caution: The shaving foil is a very
delicate part that must not be
cleaned with the brush.
12. We recommend that you oil the
trimmer every 3 months with a
drop of sewing machine oil.
13. Put the shaving foil frame back on
and snap it into place.
14. Replace the OptiTrim attachment
because it also serves as a
protective cap.
Caution: Do not use the shaver head
with a damaged shaving foil.
Replacing the shaving parts
The shaving foil and the cutter block
are precision parts that wear out with
the time. Have the shaving foil frame
and the cutter block replaced when
you notice a reduced shaving
performance.
Subject to change without notice.
This product conforms to the
European Directives EMC
2004/108/EC and Low Voltage
2006/95/EC.
Please do not dispose of the
product in the household
waste at the end of its useful
life. Disposal can take place
at a Braun Service Centre or at
appropriate collection points
provided in your country.
5399398_SE2270_P6-52 Seite 13 Dienstag, 3. Juli 2007 3:45 15