Alpha Technologies FXM Communication - Manual (Page 7)

5
FXM Communication Manual
3 Novus User Software (Continued)
To control the unit or change it’s settings
or parameters, either click on the On/Off
buttons, or choose an item from a drop
down menu. Then click on the UPDATE
SETTING button. If you do not click on this
button, the change will not happen.
UPS SPECIFICATION
This read-only screen shows the UPS’s factory-set
specifications.
UPS MONITORING
These read-only screens show the UPS’s current input
and output values and other measurements.
Input & Output: This shows you the current line input and
UPS output values and the UPS’s present operating mode.
Battery & Inverter: This shows you the battery string’s status
as well as how many times and for how long the inverter has
been active.
Relay & Load Shed: This shows you how the front panel
dry contacts are configured. If any relays are used for load
shedding, it shows the time they are set to.
Last Event: This shows you the last event the UPS went
through. It shows what fault or alarm triggered the event.