ABUS TVCC81500 Operating instructions User Manual
Page 35
35
MOTION PARAMETER
AUTO FLIP
ON
PROPORTIONAL PAN
ON
PARK TIME
5
PARK ACT
NONE
SCAN SPEED
28
IMAGE FREEZE
OFF
DOME SPEED
8
PRESET SPEED
8
LIMIT STOP
OFF
SETTING STOPS
-
CLEAR STOPS
-
ELEVATION SET
OFF
Function
Description
AUTO FLIP
Activate the Auto Flip function. This function is helpful when
people are directly under the dome.
PROPORTIONAL PAN
ON: The pan and tilt speed is controlled depending on the
zoom setting. We recommend you use this setting.
OFF: There may be difficulties following people when there
is a high zoom factor.
PARK TIME
After a certain period (5
–720 seconds) of inactivity, the
dome can perform the following functions.
PARK ACT
One of these functions can be performed after the set time
elapses:
Preset 1
–8, Pattern 1–4, Pan Scan, Tilt Scan, Random
Scan, Frame Scan, Panoramic Scan, Day Mode or Night
Mode.
SCAN SPEED
Setting of the scan speed:
1
–40°/sec.
IMAGE FREEZE
The function freezes the live image during start of one. This
reduces the network load in networks. In addition, private
areas can be hidden.
DOME SPEED
The speed of the dome can be selected between HIGH,
MEDIUM and LOW.
PRESET SPEED
The speed for starting from a preset can be between level 1
and 8.
LIMIT STOP
This allows the following area to be enabled and disabled for
the limits.
SETTING STOPS
Here you can define a range in which the dome is allowed to
move. Follow the instructions on the OSD to set all four
directions.
CLEAR STOPS
Delete the set limits.
PRESETS