ABUS TVAC16010B User Manual

Page 10

Text mode
Original mode

English

5.2 Installing the camera

Select a suitable place for installing the camera using the camera mount. Mark the drill holes on the base
and pre-drill them. Insert the wall plugs provided and attach the mount with the screws.

You now have the option of swivelling the mount by 90° to position it where you want it. Loosen the screw
at the side and set the angle of view required. Then tighten the screw in the required position to fasten.

Then screw the camera onto the mount and the power supply unit with the camera.

Warning:
Before you start with the installation, make sure that the wireless transmission range reaches
your desired installation location.