AAEON ACP-5217 - Manual (Page 68)

M u l t i - T o u c h P a n e l P C A C P - 5 2 1 7
4.1 Installation:
Insert the ACP-5217 DVD-ROM into the DVD-ROM drive. And
install the drivers from Step 1 to Step 10 in order.
Step 1 – Install Chipset Driver
1. Click on the STEP 1-CHIPSET folder and select the OS
folder your system is
2. Double click on the infinst_autol.exe file located in each
OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the STEP2-VGA folder and select the OS folder
your system is
2. Double click on the Setup.exe file located in each OS
folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Note 1:
 This motherboard supports VGA and
LVDS display devices. In Single Display
mode, use the hot keys to s
between VGA to LVDS device o
versa. By default, press
witch
r vice
> to
switch to LVDS device.
 Before removing the current display
++ to switch to VGA
device and press ++
Chapter 4 Driver Installation 4-3