AAEON HSB-800I - Manual (Page 38)

H a l f - s i z e S B C H S B - 8 0 0 I
Chapter 4 Driver Installation 4-4
Step 2 –Install AES Driver
Place the Driver CD-ROM into your CD-ROM drive and follow
the steps below to install.
1. Click on Start button
2. Click on Settings button
3. Click on Control Panel button
4. Click on System button
5. Select Hardware and click on Device Manager…
6. Double click on Entertainment Encryption/Decryption
Controller
7. Click on Update Driver…
8. Click on Next
9. Select Search for a suitable driver…, then click on Next
10. Select Specify a location, then click on Next
11. Click on Browse
12. Select “lxaes” file from CD-ROM (Drivers/Step 2 –
AES) then click on Open
13. Click on OK
14. Click on Next
15. Click on Yes
16. Click on Finish
Step 3 –Install PCI to ISA Bridge Driver
1. Click on Start button.
2. Click on Settings button