AAEON EMB-B75A - Manual (Page 42)

3-10 EMB-B75A
SLP_S4 Assertion Width [Enabled]
Allows you to set the minimum assertion width of the SLP_S4 signal.
Configuration options: [1-2 seconds] [2-3 seconds] [3-4 seconds] [4-5 seconds]
Restore AC Power Loss [Last State]
[Power On]
The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
3.4.2 System Agent (SA) Configuration
CHAP Device (B0:D7:F0 [Disabled]
Allows you to enable or disable the SA CHAP device.
Configuration options: [Enabled] [Disabled]
Thermal Device (B0:D4:F0) [Disabled]
Allows you to enable or disable the SA Thermal device.
Configuration options: [Enabled] [Disabled]
Enable NB CRID (B0:D4:F0) [Disabled]
Allows you to enable or disable the NB CRID workaround function.
Configuration options: [Enabled] [Disabled]
BDAT ACPI Table Support [Disabled]
Allows you to enable or disable the BDAT ACPI table.
Configuration options: [Enabled] [Disabled]
C-State Pre-Wake [Disabled]
Allows you to enable or disable the C-State Pre-Wake feature.
Configuration options: [Enabled] [Disabled]
Graphics Configuration
Allows you to configure the graphics settings.
DMI Configuration
Allows you to control various DMI functions.
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.