AAEON IMBI-QM57 - Manual (Page 41)

I n d u s t r i a l M o t h e r b o a r d I M B I - Q M 5 7
Appendix A Programming the Watchdog Timer A-4
WatchDog Timer Configuration Registers
Configure Control (Index=02h)
This register is write only. Its values are not sticky; that is to say, a
hardware reset will automatically clear the bits, and does not
require the software to clear them.
Watch Dog Timer 1, 2, 3 Control Register (Index=71h,81h,91h
Default=00h)