AAEON PFM-T096P User Manual
Page 36
D I O M o d u l e
P F M - T 0 9 6 P
Chapter 3 Driver Installation
3 - 16
1. Digital IO input settings (Checked means set in input mode)
2. Digital IO data status (Checked means High, otherwise Low)
3. There are five interrupt mode:
a.
Disable: No interrupt
b.
Edge: When encounter
Falling
or
Rising
edge, an interrupt
occurs
c.
Level: When encounter
Low
or
High
level, interrupt occurs
repeatly
d.
Change State: When DIO data status changed, an interrupt
occurs
e.
Pattern Match: When pattern matching, interrupt occurs.
According these mode, here will present different function:
Edge
0: Falling, 1: Rising
Level
0: Low, 1: High
Change State
0: Enable, 1: Disable
Pattern Match
EX: Set pin interrupt mode bit7~bit0 = 0b00111000. When getting
See also other documents in the category AAEON Hardware:
- PCM-QM77 (172 pages)
- PCM-LN02 (70 pages)
- PCM-9452 (64 pages)
- PCM-8120 (71 pages)
- PCM-5895 Rev.A (78 pages)
- PCM-5895 Rev.B (72 pages)
- EPIC-QM77 (138 pages)
- EPIC-CV07 (128 pages)
- EPIC-HD07 (97 pages)
- EPIC-CV01 Series (44 pages)
- EPIC-9456 (59 pages)
- EPIC-9457 Rev.A (62 pages)
- EPIC-9457 Rev.B (58 pages)
- EPIC-5536 (69 pages)
- EPIC-QM57 (79 pages)
- PCM-3116 (1 page)
- PCMCIA_CompactFlash (28 pages)
- PFM-CVS Rev.B (123 pages)
- PCM-3794 Rev.B (1 page)
- PFM-C42C (25 pages)
- PCM-3660 Rev.B (14 pages)
- PFM-C20N (44 pages)
- PFM-P13DW2 (10 pages)
- PFM-535S (53 pages)
- PFM-540I Rev.B (54 pages)
- PFM-540I Rev.А (62 pages)
- PFM-541I (54 pages)
- PFM-HDS (105 pages)
- PFM-CVS Rev.A (107 pages)
- PFM-LNP (44 pages)
- GENE-QM87 (134 pages)
- GENE-5315 (74 pages)
- GENE-HD05 (116 pages)
- GENE-U15B (60 pages)
- GENE-TC05 (109 pages)
- GENE-LN05 Rev.B (64 pages)
- GENE-9455 Rev.B (63 pages)
- GENE-9455 Rev.А (64 pages)
- GENE-9310 (61 pages)
- GENE-QM67 (89 pages)
- GENE-QM57 (75 pages)
- GENE-QM77 Rev.B (157 pages)
- GENE-QM77 Rev.А (101 pages)
- ETX-701 (62 pages)