IMP Pumps NMT(D) SMART (C) - Manual (Page 24)

-24-
GB
3. Electrical installation
Electrical connection and protection must be carried out according to local
regulations.
WARNING!
• Before making any connection or fitting to the module, switch
off power supply.
• Wires should be routed so no wire crosses the center barrier.
• Relay cable (NO, C, NC) must be separated from all other
wiring with reinforced insulation. Cable outer layer must not be
stripped longer than 15 mm.
4. Technical data
Ambient temperature: 0°C to 40 °C.
Ambient humidity: <95 % relative, non-condensing.
We reserve the right to make technical changes!