GEARENCH U6184T PETOL HYDRA-TORK - Manual (Page 3)

3
Petol U6184T Hydra-Tork Description
The U6184T Petol Hydra-Tork unit was designed for making up and breaking out downhole
tools. It is rated for operation on 4-1/2” to 10-3/4” diameters with a maximum working load
of 37,300 ft-lbs depending on the diameter. See the chart on the following page for specific
torque ratings. The unit may be operated in any position (horizontal or inclined) and is
totally portable.
The Petol Drill Pipe Tongs are adjusted to the different diameters within their range by
adjusting the chain screw nut for fine adjustment and by adding or removing sections of
chain for the coarse adjustment.
The U6184T also offers the following features:
Two integral vee-saddles mounted on the hydra-tork base for support.
Can be operated with any commercially available hydraulic power unit capable of
delivering 3000-psi pressure.
A breakdown base, which allows the unit to be quickly disassembled and assembled
without tools for easy transport.