GEARENCH ZB1260U PETOL Hydraulic Pump Bench - Manual (Page 3)

3
Petol ZB1260U Unit Description
The ZB1260U Petol Friction Breakout Unit was designed for making up and breaking out
downhole pumps and specialty downhole tools requiring accurate torque and no marking.
The unit is equipped with a hydraulic cylinder, which may be powered by any hydraulic
power source capable of producing up to 5000 psi.
The unit may be used with any pump shop equipment manufactured by Gearench. The unit
may be configured in any fashion using floor plates, pump stands, and extension stands for
working on tools of any length.
Warning:
The unit should not be operated at a pressure above 5000 psi. The tong or wrench
being used with the cylinder may have a torque rating lower than 5000 foot-pounds in
which case the maximum operating pressure will be less. Applying too much pressure
for the tong or wrench may result in damage to the tong or wrench and possibly in
injury to personnel.