GEARENCH U118-123L PETOL HYDRA-TORK User Manual
Page 3
1
Petol U118-123L Hydra-Tork Description
The U118-123L Petol Hydra-Tork unit was designed for making up and breaking out
downhole tools. It is rated for operation on 4" to 24" diameters with a maximum working
load of 90,000 ft-lbs.
The Petol Pulldown Visetong and Petol Tongvise are adjusted to the different ODs within
their range by pulling the Petol Special Chain through the jaw and engaging a cam lock
lever. No addition or removal of chain sections is required.
The U118-123L also offers the following features:
A shock mounted hydraulic console not attached to the base to provide maximum
flexibility in the setup and location of the power unit for efficient use of shop space.
All controls are 24 volts AC, NEMA type 13.
The tong cylinder and vise base are mounted on tracks for switching from make up to
break out.
One adjustable vee-saddle mounted on the hydra-tork base for added support. This
vee-saddle is also mounted on tracks for easy adjustment.
A 12-foot long base for accommodating long tools with additional working space.
An integral tong lift cylinder to raise and lower the tong from the tool without using
an over-head hoist.
Automatic cycling of the tong for long make-up and breakout jobs.
Digital torque display for direct reading of torque in 10 foot-pound increments with
an auxiliary output for a recorder at 1 volt / 20,000 foot-pounds.
A strip chart recorder (separate item) for recording the applied torque.
Operating voltages are 208/240/460 volts, 3 phase, 10 horsepower. 277/380 volts, 3
phase, 10 horsepower is available upon request.