GEARENCH U118 PETOL HYDRA-TORK - Manual (Page 3)

1
Petol U118 Hydra-Tork Description
The U118 Petol Hydra-Tork unit was designed for making up and breaking out downhole
tools. It is rated for operation on 4" to 24" diameters with a maximum working load of
90,000 ft-lbs.
The Petol Pulldown Visetong and Petol Tongvise are adjusted to the different ODs within
their range by pulling the Petol Special Chain through the jaw and engaging a cam lock
lever. No addition or removal of chain sections is required.
The U118 also offers the following features:
A shock mounted hydraulic console not attached to the base to provide maximum
flexibility in the setup and location of the power unit for efficient use of shop space.
All controls are 24 volts AC, NEMA type 13.
The tong cylinder and vise base are mounted on tracks for switching from make up to
break out.
One adjustable vee-saddle mounted on the hydra-tork base for added support. This
vee-saddle is also mounted on tracks for easy adjustment.
Operating voltages are 208/240/460 volts, 3 phase, 10 horsepower. 277/380 volts, 3
phase, 10 horsepower is available upon request.