GEARENCH TJA35 PETOL Tong Jack - Manual (Page 8)

6
Responsibility of Distributors
IT IS THE RESPONSIBILITY OF THE PURCHASERS OF GEARENCH PRODUCTS TO
CONVEY THE INFORMATION IN THIS PUBLICATION AND ANY OTHER
INFORMATION RELATING TO THE INDIVIDUAL PRODUCT, THROUGH THE
CHANNELS OF DISTRIBUTION, DOWN TO AND INCLUDING THE INDIVIDUAL
USING THE PRODUCT
NOTE:
In view of the fact that the actual use determines whether safety requirements have
been met, the ultimate responsibility to comply rests with the end user.
Safety Precautions
1. Select the right tool for the job.
2. Keep tools in good condition.
3. Use tools correctly.
4. Keep tools in a safe place.
5. Wear protective clothing, gloves and safety shoes as appropriate.
6. Use only PETOL™ & TITAN™ replacement parts to ensure proper strength.
7. Do not exceed limitations of machine.
8. Do not use machine for unintended purposes.
9. Inspect machine prior to use.
10. Use pressure control to regulate force.
11. Place machine close to vise.
12. Review operating manual and procedures prior to use.
13. Do not place tong on non-uniform surfaces.
14. Do not place tong on thin sections.
15. Insure all dies and inserts are in good working condition on tong and vise
16. Remove any unserviceable equipment from service.
17. If equipment slips in vise, stop and reset vise.
18. Insure proper body placement during operation.
19. Insure proper hand placement.
20. Remove trip hazards and unnecessary objects from area.
21. Wear appropriate personal protection equipment.