GEARENCH PETOL Slim Grip Tongs - Manual (Page 3)

1
Petol SlimGrip Tong Description
The Petol SlimgGrip Tongs were designed for making up and breaking out casing, drill pipe,
down hole tools, and other tubular products with restricted gripping widths. The Petol
SlimGrip Tongs have the following specifications:
Model: SLG10
Diameter Range: 1 – 2 1/4 inches
Working Load: 1500 ft-lbs
Torque Arm Length: 18 1/4 - 18 7/8 inches
Gripping Width: 1 – 3/16 inches
Maximum Line Pull: 950 lbs
Model: SLG13
Diameter Range: 2-3/8 - 4 inches
Working Load: 5000 ft-lbs
Torque Arm Length: 32 - 34 inches
Gripping Width: 1 – 3/4 inches
Maximum Line Pull: 1760 lbs
Model: SLG15
Diameter Range: 3 1/2 - 6 1/2 inches
Working Load: 7500 ft-lbs
Torque Arm Length: 41 – 42 3/4 inches
Gripping Width: 1 – 1/4 inches
Maximum Line Pull: 2100 lbs
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.
The Petol SlimGrip Tongs have the following features:
No adjustment needed.
Simple installation and removal of the tong from the pipe.
High strength alloy steels used throughout for long life with the toughest jobs.