GEARENCH LA16H (3-4 chain) PETOL Bull Tong - Manual (Page 16)

14
Torque and Diameter Capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Diameter
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
4 41.84 32,700 9,390
5 42.13 37,400 10,640
6 42.42 41,000 11,610
7 42.71 41,100 11,560
8 43.00 41,200 11,500
9 43.29 41,300 11,450
10 43.58 41,400 11,410
11 43.86 41,600 11,370
12 44.15 41,700 11,330
13 44.44 41,800 11,300
14 44.73 42,000 11,270
15 45.02 42,100 11,240
16 45.31 42,300 11,210
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.