Elmo Rietschle V-VCE 25/40 - Manual (Page 21)

21 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH |
Maintenance and repair
f
4
f
4
h
1
f
3
g
1
f
1
s
1
D
U
7.2.1 Air fi ltering
NOTICE
Insuffi cient maintenance on the air fi lter
The power of the machine lessens and damage may
occur to the machine..
Intake air fi lter:
The micro fi lter (Fig. 5/f
1
) must be cleaned by rinsing out
or purging or replaced more or less often depending
on how dirty the discharged medium is.
Remove the fi lter housing (Fig. 5/D) after undoing
the screws (Fig. 5/s
1
). Remove and clean the micro
fi lter.
Gas ballast valve fi lter:
The pumps work with a gas ballast valve (Fig. 4/U).
The inbuilt fi lter disc (Fig. 6/f
3
) and micro fi lter discs
(Fig. 6/f
4
) must be cleaned more or less often by
purging depending on how dirty the medium fl ow-
ing through is. By undoing the countersunk screw
(Fig. 6/g
1
) and removing the plastic cover (Fig. 6/h
1
)
the fi lter parts can be removed for cleaning.
Re-assemble in reverse order.
Fig. 5 Air fi ltering
D Filter housing
U Gas ballast valve
f
1
Micro fi lter
s
1
Screws
Fig. 6 Gas ballast valve
h
1
Cover
f
3
Filter disc
g
1
Countersunk screw
f
4
Micro fi lter discs