Manual adjustment, Electronic adjustment – AEG F67032VI0P User Manual
Page 61

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
“Setting and starting a programme”.
2. Press and hold, at the same time but-
tons (4) and (5) until the indicators of
buttons (3), (4), (5) and (6) start to
flash.
3. Press button (3).
• The indicators of buttons (4), (5)
and (6) go off.
• The indicator of button (3) contin-
ues to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4. Press button (3) again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH
61