beautypg.com

Gorman-Rupp Pumps SE1 1/2B3-E.33 12V 1483930 and up User Manual

Page 10

background image

OM−06490

SE SERIES

PAGE B − 4

INSTALLATION

1) Connect the red cable clamp from the pump

to the positive (+) terminal on negative
grounding systems, or to the negative (−) ter-
minal on positive grounding systems.

Do not allow the pump and vehicle to
come into contact when connecting the
power cable to the battery. If the pump
should develop an internal short to the
casing, electrical shock could occur,
causing severe injury or death to per-
sonnel.

2) Connect the black cable clamp from the

pump to ground, preferrably to a solid, metal-
lic, stationary point on the engine. The con-

nection should be made as far away from the
battery as possible.

VEHICLE ENGINE

BATTERY

HANDY-SUB

T

PUMP

Ground line

from pump

Power
line to

pump
(Red)

Ground

(Black)

Switch

Figure 3. Pump Power Cable Connections

(Negative Ground System)