Introduction – Gorman-Rupp Pumps 2D-X.75 3P 652300 thru 1462003 User Manual
Page 5
D SERIES
OM−01479
PAGE I − 1
INTRODUCTION
INTRODUCTION
Thank You for purchasing a Gorman-Rupp pump.
Read this manual carefully to learn how to safely
install and operate your pump. Failure to do so
could result in personal injury or damage to the
pump.
This Installation, Operation, and Maintenance
manual is designed to help you achieve the best
performance and longest life from your Gorman-
Rupp pump.
This is a D Series, positive displacement pump,
utilizing a single-action diaphragm to produce a
straight-through flow of liquid. The pump is flex-
coupled to a 3/4 HP explosion-proof electric motor.
It is ideally suited to industrial and contractor’s ap-
plications since it will handle liquids ranging from
clear water to construction-site muck. Since it is
driven by an explosion-proof motor, the pump may
be operated in a hazardous-duty environment; the
pump is not, however, designed to handle volatile,
flammable or corrosive liquids. The basic material
of construction for wetted parts is aluminum, with
neoprene flap valves and diaphragm.
If there are any questions regarding the pump or
its application which are not covered in this man-
ual or in other literature accompanying this unit,
please contact your Gorman-Rupp distributor, or:
The Gorman-Rupp Company
P.O. Box 1217
Mansfield, Ohio 44901−1217
Phone: (419) 755−1011
or:
Gorman-Rupp of Canada Limited
70 Burwell Road
St. Thomas, Ontario N5P 3R7
Phone: (519) 631−2870
The following are used to alert maintenance per-
sonnel to procedures which require special atten-
tion, to those which could damage equipment, and
to those which could be dangerous to personnel:
Immediate hazards which WILL result in
severe personal injury or death. These
instructions describe the procedure re-
quired and the injury which will result
from failure to follow the procedure.
Hazards or unsafe practices which
COULD result in severe personal injury
or death. These instructions describe
the procedure required and the injury
which could result from failure to follow
the procedure.
Hazards or unsafe practices which COULD
result in minor personal injury or product
or property damage. These instructions
describe the requirements and the possi-
ble damage which could result from failure
to follow the procedure.
NOTE
Instructions to aid in installation, operation,and
maintenance, or which clarify a procedure.