Gorman-Rupp Pumps 62E31-B All serial numbers - Manual (Page 6)

60 SERIES PUMPS OM−04020
PAGE A−2 SAFETY
This pump is designed to be used with
volatile and/or flammable liquids; over-
heating may produce dangerous fumes.
Take precautions to ensure the area sur-
rounding the pump is adequately venti-
lated. Allow the pump to completely
cool and use extreme caution when
venting the pump, or when removing
covers, plates, plugs, or fittings.
Overheated pumps can cause severe
burns and injuries, and produce explo-
sive fumes. If overheating of the pump
occurs:
1. Stop the pump immediately.
2. Ventilate the area.
3. Allow the pump to completely cool.
4. Check the temperature before
opening any covers, plates,
gauges, or plugs.
5. Vent the pump slowly and cau-
tiously.
6. Refer to instructions in this manual
before restarting the pump.
Do not install and operate a non-explo-
sion proof motor in an explosive atmo-
sphere. Install, connect, and operate
the motor in accordance with The Na-
tional Electric Code and all local codes.
If there is a conflict between the instruc-
tions in the manual accompanying the
unit and The National Electric Code or
the applicable local code, The National
or local code shall take precedence. All
electrical equipment supplied with this
pump conformed to applicable federal
regulations and national codes in effect
on the date of manufacture.